Dear Readers, Welcome to Production Management and Industrial Engineering Interview Questions and Answers have been designed specially to get you acquainted with the nature of questions you may encounter during your Job interview for the subject of Production Management and Industrial Engineering Interview Questions. These Production Management and Industrial Engineering Questions are very important for campus placement test and job interviews. As per my experience good interviewers hardly plan to ask any particular questions during your Job interview and these model questions are asked in the online technical test and interview of many IT & Non IT Industries.
Ans - fixation of incentive rate
Ans - for production scheduling.
ans - to minimize the cost without changing the quality of the product.
Ans - Minimizing production delay, increasing floor area and ensuring production quality.
Ans - work measurement and method study .
Ans - For Inventory Control
Ans - C .
Ans - Optimistic, Pessimistic and most likely time.
Ans- for avoiding excessive multiplication of facilities.
ans - Waiting time.
ans- triple time estimate.
ans- by summing fixed cost and variable cost.
ans- for minor works.
ans - By optimistic, pessimistic and most likely time.
ans - for small organization.
ans - Yes.
ans- Man-machine chart.
ans- utility of the product
ans- for estimating the percentage utilization of machine tools, estimating percentage time, finding time study in certain situations.
ans- Prime cost + Factory overhead .
ans- motion study + job enrichment + time study
ans - Yes .
ans- travel chart.
ans - Hoist.
ans - The path followed by materials and men while doing a job.
ans- Just-in-time, or lean manufacturing, is a production management theory formed for production efficiency by the continuous reduction of waste. JIT includes the reduction of inbound inventory by giving a delivery schedule to suppliers and thus minimizing outbound stocks. It reduces the creation of scrap materials and diminished the wasted time. It improves cash flow and sales margin.
ans- Flow control is optimized production technology. In the production process It emphasizes on the efficient flow of material.
ans- Fixed position layout.
ans- by the analysis of standard data system
ans- ( Crash cost - Normal cost ) /(Normal time - Crash time)
ans - For each activity only one arrow should be used > In the diagram dangling must be avoided > No consumption of time and resources by dummy activity.
ans- for linear programming .
ans- It is a wage incentive plan which ensures minimum wage for a worker and bonus is paid for the fixed percentage of time he/she saved.
ans- Evaluating the value of a job in relation to other jobs .
ans- fixed cost + variable cost.
ans - Direct - Wages. Indirect - Electricity Bills .
ans- String diagram is a tool which reduces the unnecessary movements by optimizing the design of the work space. It is used for checking the acceptance of different layouts.
ans - Product layout.
ans - It has zero slack.
ans - Yes.
ans - Short term.
ans - better quality of work > Minimum wastage of materials > proper guidance and supervision of the workers.
ans - Subdivision is done in micromotion for an operation for its analysis and completion. Purposes - Doing work most efficiently > Teach people motion economy principle > collecting time motion data.
ans- Stop watch.
ans - When Sales revenue is greater than total cost.
ans- Standard time + policy allowance .
ans- Programme needed for the operation.
ans- Functional organization.
ans- 1. creative phase 2. information phase 3. investigation phase and 4. evaluation phase.
ans- In large production scale.
ans - loads should be uniform , no variation the routs and continuous movement of the material.
ans - True .
ans - The perfect time for starting the job and the amount of work that should be completed in a certain amount of time.
ans- fixed position layout,
ans- Information about production scheduling.
ans- when material reaches its minimum value.
ans - To evaluate workers performance in a work.
ans - It is the theory for determining the waiting times and queue lengths by using mathematical study. It is basically the study of waiting lines .
ans - delay contingency allowance plus the total work content time.
64. What is the full form of PERT ?
ans - Programme Evaluation and Review Technique
ans - when his or hers output efficiency exceeds 67%.
|Production Technology Interview Questions & Answers|
|Production Technology Multiple choice Questions & Answers|
|Production Management and Industrial Engineering Multiple choice Questions|
|Production Management and Industrial Engineering Interview Questions|