Dear Readers, Welcome to Android Interview Questions and Answers have been designed specially to get you acquainted with the nature of questions you may encounter during your Job interview for the subject of Android. These Android Questions are very important for campus placement test and job interviews. As per my experience good interviewers hardly plan to ask any particular questions during your Job interview and these model questions are asked in the online technical test and interview of many IT companies.
Android is a stack of software for mobile devices which has Operating System, middleware and some key applications. The application executes within its own process and its own instance of Dalvik Virtual Machine. Many Virtual Machines run efficiently by a DVM device. DVM executes Java languages byte code which later transforms into .dex format files.
A single scre an applicationwith supporting Java code
A class (Intent) will describes what a caller desires to do. The caller will send this intent to Android’s intent resolver, which finds the most suitable activity for the intent. E.g. opening a PDF document is
an intent, and the Adobe Reader apps will be the perfect activity for that intentcIass).
sendStickyBroadcast() performs a sendBroadcast (Intent) known as sticky, i.e. the Intent you are sending stays around after the broadcast is complete, so that others can quickly retrieve that data through the return value of registerReceiver (BroadcastReceiver, IntentFilter). In all other ways, this behaves the same as sendBroadcast(Intent)
One example of a sticky broadcast sent via the operating system is
ACTION_BATTERY_CHANGED. When you call registerReceiver() for that action — even with a null BroadcastReceiver — you get the Intent that was last broadcast for that action. Hence, you can use this to find the state of the batterywithout necessarily registering for all future state changes in the battery.
Is there anyway to determine if an Intent passed into a BroadcastReceiver’s onReceive is the result of a sticky Boradcast Intent, or if it was just sent?
Example for sticky broadcast
When you call registerReceiver( ) for that action -- even with a null BroadcastReceiver — you get the Intent that was last broadcast for that action. Hence, you can use this to find the state of the battery without necessarily registering for all future state changes in the battery.
Android applications su ppor using Java programming Language. which is coded in Java and complied using Android SDK.
A user defined JSON, XML, bitmap, or other file, injected into the application build process, which can later be loaded from code.
PermissionsWOCESS_OUTGOING_CALLS: Will Allows an application to monitor, modify, or abort outgoing calls. So through that we can monitor the Phone caIlsi
Class - The Class file is complied from .java file. Android will use this .class file to produce the executable apk
File - It is a block of resources, srbitrary information. It can be an y file type.
Activity - An activity is the equivalent of a Frame/Window in GUI toolkits. It is not a file or a file type it is just a class that can be extended in Android for loading UI elements on view.
11. What is APK format.
The APK file is compressed AndroidManifest.xml file with extension .apk, Which have application code (.dex files), resource files, and other files which is compres sed into single .apk file.
The Google translator translates the data of one language into another language by using XMPP to transmit data. You can type the message in English and select the language which is understood by the citizens of the country in order to reach the message to the citizens.
A description of something that an Intent sender desires.
The following are the advantages of Android:
* The customer will be benefited from wide range of mobile applications to choose, since the monopoly of wireless carriers like Orange and AT&T will be broken by Google Android.
* Features like weather details, live RSS feeds, opening screen, icon on the opening screen can be customized
jnnovative products like the location -aware services, location of a nearby convenence store etc., are some of the additive facilities in Android.
TTL is a value in data packet of Internet Protocol. It communicates to the network router whether or not the packet should be in the network for too long or discarded. Usually, data packets might not be transmitted to their intended destination within a stipulated period of time. The TTL value is set by a system default value which is an 8 -bit binary digit field in the header of the packet. The purpose of TTL is, it would specify certain time limit in seconds, for transmitting the packet header. When the time isexhausted, the packet would be discarded. Each router receives the subtracts courwhen the packet is discarded, and when it becomes zero, the router tects the discarded packets and sends a message, Internet Control Messa Protocol message back to the originating host.
It is a resizable bitmap resource that can be used for backgrounds or other images on the device. The NinePatch class permits drawing a bitmap in nine sections. The four corners are unscaled; the four edges a re scaled in one axis, and the middle is scaled in both axes.
IP datagram can be used to describe a portion of P data. Each IP datagram has set of fields arranged in an order. The order is specific which helps to decode and read the stream easily. IP datagram has fields like Version, header length, Type of service, Total length, checksum, flag, protocol, Time to live, Identification, source and destination ip address, padding, options and payload.
MTU:- Maximum Transmission Unit is the size of the largest packet that a communication protocol can pass. The size can be fixed by some standard or decided at the time of connection Fragmentation is a process of breaking the IP packets into smaller pieces. Fragmentatio n is needed when the datagram is larger than the MTU. Each fragment becomes a datagram in itself and transmitted independently from source. When received by destination they are reassembled.
The following are the exceptions that are supported by allow:
* InflateException : When an error conditions are occurred, this exception is thrown
* Surface.Out0fResourceException: When a surface is not created or resized, this extion is thrown
* SurfaceHolder.BadSurface TypeException: This exception is thrown from the lockCanvas()
method, when invoked on a Surface whose is SURFACE_TYPE_PUSH_BUFFERS I WindowManager.BadTokenException: This exception is thrown at the time of trying to add view an invalid WindowManager.Layou tParamstoken.
Android Application Architecture has the following components:
* Services ? like Network Operation
* Intent - To perform inter-communication between activities or services
* Resource Externalization - such as strings and graphics
* Notification signaling users - light, sound, icon, notification, dialog etc.
• Content Providers - They share data between applications
The following are the advantages of Android:
‘The customer will be benefited from wide range of mobile applications to choose, since the monopoly of wireless carriers like AT&T and Orange will be broken by Google Android.
‘Features like weather details, live RSS feeds, opening screen, icon on the opening screen can be customized
Innovative products like the location -aware services, location of a nearbyconvenience Store etc., are some of the additive facilities in Android.
How to select more than one option from list in android xml file? Give an example. Specify android id, layout height and width as depicted in the following example.
The followng are the exceptions that are supportedAndroid
* InflateException: When an error conditions are occurred, this exception is thrown
Surface.OutOfResourceException: When a surface is not created or resized, this exception 1hro
*SurfaceHolder.BadSurfaceTypeException: This exception is thrown from the lockCanvas() method, when invoked on a Surface whose is SURFACETYPE_PUSH_BUFFERS
• WindowManager.BadTokenException: This exception is thrown at the time of tryrng to add view an invalid WindowManager.LayoutParamstoken.
*components can be reused and replaced by the application framework.
*Optimized DVM for mobile devices
*SQLite enables to store the data in a structured manner.
*Supports GSM telephone and Bluetooth, WiFi, 3G and EDGE technologies
*The development is a combination of a devi ce emulator, debugging tools, memory profiling and plug -in for Eclipse IDE.
In a domain, one or more computer can be a server to manage the network. On the other hand in a orkgroup all computers are peers having no control on each other. In a domain.
user doesn’t need an account to logon on a specific computer if an account is available on the domain. In a work group user needs to have an account for every computer.
In a domain, Computers can be o n different local networks. In a work group all computers needs to be a part of the same local network.
Multiple choice list can be viewed by making the CheckBox android:id va lue be “@android:id Itextl “. That is the ID used by Android for the CheckedTextView in
Android supports 4 dialog boxes:
AlertDialog: An alert dialog box supports 0 to 3 buttons and a list of selectable elements, including check boxes and radio buttons. Among the other dialog boxes, the most suggested dialog box is the alert dialog box.
ProgressDialog: This dialog box displays a progr ess wheel or a progress bar. It is an extension of AlertDialog and supports adding buttons.
DatePickerDialog: This dialog box is used for selecting a date by the user.
TimePickerDialog: This dialog box is used for selecting time by the user.